350-401 Reliable Exam Sample Questions - Cisco 350-401 Training Online - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor.Html/?Fd=AHR0CDovL3D3Dy5KZWxldi5HdC9PbmRleC5WaHA= - Delev
The frequently updated of 350-401 Reliable Exam Sample Questions latest torrent can ensure you get the newest and latest study material. You will build confidence to make your actual test a little bit easier with 350-401 Reliable Exam Sample Questions practice vce. The 350-401 Reliable Exam Sample Questions authorized training exams provided by Delev helps you to clear about your strengths and weaknesses before you take the exam. This certification gives us more opportunities. Compared with your colleagues around you, with the help of our 350-401 Reliable Exam Sample Questions preparation questions, you will also be able to have more efficient work performance. Our Software version of 350-401 Reliable Exam Sample Questions study materials will be your best assistant.
CCNP Enterprise 350-401 If you make up your mind, choose us!
When you purchase 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Sample Questions exam dumps from Delev, you never fail 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Sample Questions exam ever again. Of course, their service attitude is definitely worthy of your praise. I believe that you are willing to chat with a friendly person.
Also, we offer you with 24/7 customer services for any inconvenience. Our support team is always in action and ready to help, if you have any question regarding the 350-401 Reliable Exam Sample Questions exam, so you can get in contact, our support team will always help you with the best solution. Delev trusts in displacing all the qualms before believing us.
Cisco 350-401 Reliable Exam Sample Questions - These interactions have inspired us to do better.
We are now in an era of technological development. 350-401 Reliable Exam Sample Questions had a deeper impact on our work. Passing the 350-401 Reliable Exam Sample Questions exam is like the vehicle's engine. Only when we pass the exam can we find the source of life and enthusiasm, become active and lasting, and we can have better jobs in today’s highly competitive times. To pass the 350-401 Reliable Exam Sample Questions exam, careful planning and preparation are crucial to its realization. Of course, the path from where you are to where you want to get is not always smooth and direct. Therefore, this is the point of our 350-401 Reliable Exam Sample Questions exam materials, designed to allow you to spend less time and money to easily pass the exam.
After you purchase our product you can download our 350-401 Reliable Exam Sample Questions study materials immediately. We will send our product by mails in 5-10 minutes.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Nutanix NCP-US - We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. CompTIA CAS-004 - Our company has the highly authoritative and experienced team. Huawei H13-923_V1.0 - Therefore, when you are ready to review the exam, you can fully trust our products, choose our learning materials. Because our SAVE International VMA study torrent can support almost any electronic device, including iPod, mobile phone, and computer and so on. Microsoft AZ-204 - You also can become the lucky guys as long as you are willing to learn.
Updated: May 28, 2022